- Total ৳ 0.00
- checkout
The audit checklist is on the table. The buyer visit is two weeks away. And somewhere between the production floor and the compliance office, the furniture in your facility is telling a story you may not have intended to tell.
Mismatched storage. Unstable trolleys. An inspection table that wobbles. In Bangladesh's RMG industry, garment furniture is not a procurement footnote; it's infrastructure.
The right pieces keep your floor organised, your compliance documentation retrievable, and your facility audit-ready every day. Hatim Furniture's garment range was built specifically for that job.
Garment factory furniture in Bangladesh pricing spans a wide range, depending on the operational zone you're fitting out. All current items carry a 6% discount from their regular listed rates.
Pro Tip: For a mid-size garment facility fitting out a new production floor, the Cutting Input Trolley at ৳ 8,100 and the Wastage Keeping Trolley at ৳ 15,700 offer the strongest entry-level bulk value.
Together, they cover the two most frequently audited areas of floor organisation, material input flow, and waste management, at a combined discounted cost of under ৳ 24,000 per pair.
What Makes Garment Furniture Different From Standard Office Furniture
Three things separate purpose-built industrial furniture in Bangladesh from general commercial pieces.
Shift-long durability under real production loads.
Every item in this range is made of welded mild steel with an anti-rust powder-coated finish.
Standard office furniture built from MDF or lightweight metal frames degrades fast under the continuous physical use of a production floor, trolleys loaded with fabric rolls, dining tables used by hundreds of workers across three shifts, and inspection tables bearing heavy garment bundles for hours at a stretch.
Compliance and audit readiness.
International buyers and social compliance auditors read your facility's organisation as a signal for how you manage your entire operation.
A Needle Stock Box that accounts for every needle is not just a safety measure; it's an audit requirement. A defined QC workstation tells an auditor that quality control is a process, not an afterthought.
Resistance to heat, humidity, and fabric dust.
Garment factories in Dhaka, Gazipur, Narayanganj, and Chittagong run in environments where moisture and dust are constant. Furniture not built for this degrades visibly within months. Electrostatic epoxy powder-baked paint on welded steel frames is the specification that holds.
Good to Know: HATIM Furniture holds ISO 9001:2015 (Quality Management) and ISO 45001:2018 (Occupational Health and Safety) certifications.
For compliance officers preparing for international buyer audits, this matters directly.
ISO 45001:2018 aligns HATIM's manufacturing standards with the same health and safety frameworks international brands apply to their own supply chains, making it a documentable, defensible procurement decision in any CSR or social compliance report.
No single piece of garment office furniture serves every zone of a factory. Map your facility by area first, then order by zone.
Production floor — Cutting Input Trolleys and Wastage Keeping Trolleys handle material flow and waste management, the two most frequently audited areas of floor organisation.
QC section — Inspection Tables and Finishing Quality Tables provide stable flat surfaces at the correct working height for garment checking, folding, and end-of-line quality control.
Compliance office — Needle Stock Boxes with accurate inventory capability, organised filing, and clean workstations create a documentation environment that holds up under BSCI, WRAP, or SEDEX scrutiny.
Boardroom for buyer meetings — Executive tables and chairs from the office furniture range communicate the management standard of the organisation to visiting buyers.
Volume matters too. Worker dining infrastructure is one of the most scrutinised areas of any social compliance audit. Before ordering Worker Dining Tables, calculate the total worker headcount across all shifts and the number of seats required per rotation.
Action Item: Map each zone independently, production floor, supervisor station, compliance office, and buyer meeting room, before placing any order. HATIM Furniture's website allows category-level browsing across Garments Items, Office, Metal Storage, and Industry sections. Use all four.
The RMG sector furniture in Bangladesh range covers nine purpose-built products across five operational zones.
The Worker Dining Table HWDTM-201 is the only worker welfare item in the catalogue, built for high-use canteen environments where metal construction is required for hygiene and structural durability.
A properly furnished, clean canteen is one of the simplest compliance wins available to any factory.
The Wastage Keeping Trolley HWKTM-201 and Cutting Input Trolley HCITM-201 cover the two most visible aspects of floor organisation during an audit, waste management, and material input flow. Unmanaged floor waste is both a fire hazard and a compliance flag.
The Machine Carrying Trolley HMCTM-201 handles the movement of sewing machines and heavy equipment within the facility, essential in any operation that reorganises floor layouts between orders.
The Inspection Table HQCTM-201 and Finishing Quality Table HITM-201 together create a complete QC zone. Paired, they signal a defined, process-driven quality management system to any visiting auditor or buyer.
The Needle Stock Box HNSB-101 addresses a mandatory requirement under virtually every international social compliance standard. A broken needle must be accounted for to the last fragment; this box makes that possible.
The Visiting Card Box HVCB-101 is a small but visible detail, a simple signal of organised front-of-house management during buyer visits.
The Fire Door HFDM-201 is a fire safety infrastructure for emergency exit and compartmentalisation in production and storage areas. Following the post-Rana Plaza reform requirements, it is non-negotiable.
Tip: For facilities preparing for an international buyer visit, the Inspection Table and Finishing Quality Table are the highest-impact visible investments in the range. Auditors and buyers assess QC zones as proxies for the entire production management standard.
Bangladesh is the world's second-largest garment exporter.
The RMG sector generated USD 47.38 billion in exports in 2023–24 and employs approximately five million workers directly. At that scale, factory furniture price in Bangladesh is not a minor line item; it's part of the operational infrastructure that international buyers and compliance frameworks like BSCI and WRAP assess as part of ongoing market access.
Buyers conducting factory audits evaluate worker welfare facilities, floor organisation, QC workstation setup, fire safety infrastructure, and documentation systems as a package.
Furniture that is structurally inadequate or visually disorganised registers as an indicator of broader management weakness.
HATIM Furniture's all-metal construction with anti-rust frames, combined with ISO 9001:2015 and ISO 45001:2018 certifications, addresses both the physical and the compliance dimensions of that assessment.
The full garment range is available at hatimfurniturebd.com.
All nine items show regular and discounted prices with a direct Add to Cart available from the listing.
For bulk procurement, equipping a new facility, or ordering for multiple production floors, the WhatsApp channel on the website is the most direct route for volume discussion and delivery scheduling.
HATIM Furniture delivers nationwide across all upazilas in Bangladesh, including industrial zones in Gazipur, Savar, Narayanganj, Chittagong EPZ, and all major divisional cities.
Delivery runs within 3 to 15 days from order confirmation. All items carry a one-year free service warranty for manufacturing faults.
In an industry where every detail gets audited, the furniture in your facility is never just furniture; it's a statement about how you run your operation.
Nine products: Worker Dining Table, Wastage Keeping Trolley, Cutting Input Trolley, Machine Carrying Trolley, Inspection Table, Finishing Quality Table, Needle Stock Box, Visiting Card Box, and Fire Door. All are metal-constructed.
Yes. The range directly addresses key audit inspection points , worker welfare, floor organisation, quality control, needle control, and fire safety. The ISO 45001:2018 certification of the manufacturer is an additional compliance-relevant credential.
Yes. For volume procurement, contacting the team via the WhatsApp channel before checkout is recommended to align on delivery scheduling and installation support.
All items carry a one-year free service warranty for manufacturing faults.
Yes. HATIM Furniture holds ISO 9001:2015, ISO 45001:2018, and ISO 14001:2015 certifications.
Shopping Options
price
Materials